Trainee Name____________________________

Trainee Social Security Number: ____________

Trainee Status:  _______

Course Name: ___________________

Course Code: ___________________                                 

National Center Course Number: ___________

Date Course Completed: ____________________

Performance Criteria Completed:  _____________

Performance Objectives:

                                                                                                                    Pass     Fail                  

Topic 1: Getting Started

1.1 Describe the basic types of shaft misalignment.

1.2 Properly set up dial indicators and their mounting brackets
      to perform a rim and face shaft alignment.

1.3 Properly perform equipment checks and adjustments that
      are necessary before alignment readings are taken using
      the rim and face method.

Topic 2: Aligning Horizontally Mounted Equipment 

2.1 Properly take the tape measurements that are required on
      horizontally mounted equipment before a rim and face
      alignment can be done.

2.2 Measure vertical plane misalignment using the rim and
      face method.

2.3 Construct a graph representing misalignment in the vertical
      plane measured by the rim and face method.

2.4 Correct misalignment in the vertical plane.

2.5 Measure horizontal plane misalignment using the rim
      and face method.

2.6 Construct a graph representing misalignment in the
      horizontal plane measured by the rim and face method.

2.7 Correct misalignment in the horizontal plane.

Topic 3: Aligning Vertically Mounted Equipment 

3.1 Properly take the tape measurements that are required
      on vertically mounted equipment before a rim and face
      alignment can be done.

3.2 Measure misalignment on vertically mounted equipment
      using the rim and face method.

3.3 Construct a graph representing misalignment measured
      by the rim and face method.

3.4 Correct misalignment on vertically mounted equipment.

Performance Evaluator’s Signature _______________________________

Performance Evaluator’s Name (Print) ____________________________

Date Completed: _____________________________________________